30
iX3 565 Robot with EtherCAT User’s Manual
22792-000 Rev. A
2.6 Additional Safety Information
l
Cause injury to personnel
l
Damage itself or other equipment
l
Reduce system reliability and performance
If there is any doubt concerning the application, ask your local OMRON representative to
determine if it is an intended use or not.
2.6 Additional Safety Information
We provide other sources for more safety information:
Manufacturer’s Declaration of Incorporation
This lists all standards with which the robot complies. The Manufacturer’s Declarations for
the robot and other products are in the
Manufacturer's Declarations Guide
.
Robot Safety Guide (Cat. No. I590)
The
Robot Safety Guide (Cat. No. I590)
that is shipped with every robot system provides detailed
information on safety for OMRON robots. It also gives resources for information on relevant
standards.
Emergency Stop Circuit and Buttons
The E-Stop provided complies with ISO 10218-1 (Clause 5.5.2), with stop category 1 (per IEC
60204). The E-stop button complies with ISO 13850. The E-Stop meets the requirements of PL-d
per ISO 13849.
If you design your own front panel, it must meet the requirements of ISO 13849, and be at least
PL-d. The E-Stop button must comply with IEC 60204-1 and ISO 13850, Clause 5.5.2.
If you choose to use your own E-Stop buttons, they must meet the requirements of IEC 60204-1
and ISO 13850, Clause 5.5.2.
2.7 How Can I Get Help?
Contact your local OMRON representative or refer to the corporate website below.