Omron HN-300T2-EBK, Руководство пользователя

Страница: 11 / 18

10
Transferring Your Reading
Open the app on your smart device.
1. Transferring Automatically
Your reading will be transferred to your smart device automatically within 30 minutes after the scale is turned off.
Note
• If your reading is transferred before the scale is turned off, the “ ” symbol appears on the display during
transferring.
Transferring
Completed Automatically turns off
2. Transferring Manually
To transfer the readings manually, press the [Bluetooth] button during the power is off.
The “ ” symbol appears from the start of transferring to the end.
Transferring Completed Automatically
turns off
The scale will automatically turn off 10 seconds after transferring is completed.
Note
• If the “ ” symbol does not appear, refer to “The data is not being transferred.” in “Error Messages and
Troubleshooting” section for more detail.
• This scale will store up to 30 readings. Stored readings cannot be view on the scale’s display. You can view your
readings on the app after transferring.
• When the “ ” symbol appears on the display, your reading was not transferred. Transfer the readings before the
oldest reading is deleted.