Omron GRT1-ECT SmartSlice, Руководство по эксплуатации

Страница: 85 / 142

7 - 9
7 GRT1-ECT Installation
GX-series EtherCAT Slave Unit User’s Manual
7-2 Ins
tallation
GR
T1-E
C
T
an
d Un
it
s
7
7-2
-4 Con
necting Additional Smar
tSlice I/O
Unit
s
Connect additional SmartSlice I/O Units by aligning the sides of the Units and sliding in the next Unit
from the front. Up to 64 SmartSlice I/O Units can be connected to one EtherCAT Communication Unit.
 Connecting Turnback Units
When a SmartSlice I/O System is divided into blocks, connect a GRT1-TBR Right Turnback Unit to
the right end of the first block. Connect a GRT1-TBL Left Turnback Unit to the left side of the
expansion block and connect additional SmartSlice I/O Units. Use a GCN2-100 Turnback Cable to
connect the Turnback Units together.
The Turnback Units can be used to divide a SmartSlice I/O System into up to three blocks.
7-2-4 Connecting Additional SmartSlice I/O Units
S lide the Unit to the DIN R a il from the front.
In s ert the Unit u ntil yo u he a r a click, which indic a te s
th a t the Unit h as locked on the R a il.
It i s norm a lly not nece ssa ry to rele as e the DIN R a il
mo u nting hook when mo u nting the Unit.
GRT1-TBR Turnback Unit
(for right side of block)
Turnback Cable connectors
GRT1-TBL Turnback Unit
(for left side of block)