Omron FZ4 Series, Руководство пользователя, Страница: 282 / 656

4
Using
Tool
280 Using Custom Command FZ4 User's Manual
Description
Start the elapse time measure.
Gets the elapsed time since the specified measurement start time in Timer function.
Example
By on the store (which can be an element of real array) real variable the return value of this function,
passed to the first argument of the function Timer, of measuring the elapsed time between function calls
Timer from function calls StartTimer the typical usage is
T#=StartTimer
'*(Processing of the measurement object processing time)
TIME&=Timer(T#,0)
This program example will be stored in an integer variable unit processing time of processing of the * ms
that TIME &
Stops the execution of the program.
Stop
Parameters
None.
Return Value
None.
Description
Stops the execution of the program. The Stop statement can be used anywhere within the program.
A program that has been stopped can be resumed using the Cont statement.
This is used mainly in debugging.
Example
'When the Stop statement is executed in the program, execution of the process of Macro Program is suspended;
'however, the Macro Program processing is not exited.Thus, the processing of the menu will not be continued.
'In addition, a prompt such as that shown below will be displayed at the macro console.
'MACRO>
'While the prompt shown above is displayed, it is possible to directly input Macro Commands.
'Example: MACRO> print A&[ENT]
'When the cont command is input, program processing halted by the Stop statement is continued.
Acesst 1.0 6251194