Omron FZ4 Series, Руководство пользователя, Страница: 279 / 656

4
Using
Tool
FZ4 User's Manual Using Custom Command 277
Example
Set in a rectangular shape to the area of ??the search processing unit # 2 processing unit
Dim figure&(5)
figure&(0) = 8
'Shape Type
figure(1) = 100 'X coordinate of the upper left point
figure(2) = 100 'Y coordinate of the upper left point
figure(3) = 300 'X coordinate of the lower right corner
figure(4) = 300 'Y coordinate of the lower right corner
SetUnitFigure 2, 1, figure&()
Sets judge value of a processing unit
SetUnitJudge <unitNo>, <judge>[, <totalJudgeRefrect>]
Parameters
<unitNo> Processing unit number
<judge> Judgement result to be set
<totalJudgeRefrect> Whether or not reflected on the overall judgement
Return Value
None.
Description
Sets the judgement result of the relevant processing unit.
The processing unit-number to be set is specified for the argument <unitNo>.
To the argument <judge> as a judgment result of the setting.
The following judgement result values can be set.
JUDGE_NC No judgement (unmeasured)
JUDGE_OK Judgement result OK
JUDGE_NG Judgement result NG
JUDGE_IMAGEERROR Judgement result error (image format mismatch)
JUDGE_MODELERROR Judgement result error (unregistered model)
JUDGE_MEMORYERROR Judgement result error (insufficient memory)
It is specified for the argument <totalJudgeRefrect>(possible to omit) whether to reflect the judgment
result of the setting in the total judgment result by either of the following value.
False reflected
True not reflected
Example
Set to OK determination result of the determination result of the search processing unit # 2 processing
unit
SetUnitJudge 2, JUDGE_OK, True
Acesst 1.0 6251194