Omron FZ4 Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 656

Omron FZ4 Series Скачать руководство пользователя страница 27

1

Before

Operation

FZ4 User's Manual

Input Operations

25

Input Operations

Input operations differ depending on the type of controller.

●

Controller integrated with LCD: Operation with touch pen

●

BOX-type controller: Operation with mouse and trackball

Operation of Touch Pen

With a Controller integrated with LCD, perform the following operations when operating the touch screen
with the touch pen.

Tapping

Lightly touch the screen once with the touch pen and immediately take it off. Perform when selecting
items, etc.

Drag

Draw while pressing on the screen lightly with the touch pen.

Important

●

Be sure to use the supplied touch pen for touch screen operations.Using a pencil or ballpoint pen may damage

the touch screen.

●

In addition, response to operations may be delayed if the screen is tapped continuously and rapidly.

Basic Operation of Mouse and Trackball

With a BOX-type controller, use a mouse with a USB interface or commercially-available trackball.
(See the list for recommended products. Please refer to the product catalog.)

Note

●

Do not use the right mouse button, scroll wheel, or other buttons.

Acesst 1.0 6251194

«
...
25
26
27
28
29
...
»

Содержание FZ4 Series

















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов