Omron FZ4 Series, Руководство пользователя, Страница: 192 / 656

4
Using
Tool
190 Using Custom Command FZ4 User's Manual
Gets the character corresponding to the character code.
Chr$ (<Expression>)
Parameters
<Expression> The expression (integer type) that requests the character code.
Return Value
Returns the character type string.
The content of the value is ASCII code.
Description
Specify an integer from 0 to 255 in the <Expression>.
When the value of the <Expression> is a double-precision type real number, the fractional part is
handled as a rounded value.
When the control code is used, output by inputting the corresponding value is possible.(For example, if
Chr$(13) is used, "CR" (ctrl+M) is output)
There is the reverse function asc in relation to Chr$ and the character code that corresponds to the
character is returned as a decimal.
Example
Change the numerical value "48" to its character code.
CHARA$=Chr$(48)
The result is as follows:
CHARA$="0"
Clear processing unit measure data
ClearMeasureData <unitNo>
ClearMeasureData
Parameters
<unitNo> Processing unit number (integer type)
Return Value
None.
Description
Clear the measurement data of a processing unit registered with the position appointed with an
<unitNo>.
When an <unitNo> is omitted, Clear the measurement data of all processing units registered with a flow.
Acesst 1.0 6251194