Omron FZ3 Series, Руководство пользователя

Страница: 155 / 304

6
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
FZ3 User's Manual Controlling/Outputting through Serial Communication (Non-procedure) 153
<Parameters explanation>
scene group
data
File name Specifies the name of the file to be read with a definite path (ex.: \USBDisk\abc.bkd).
Only files that are under the following systems and have a "BKD" extension can be read.
- RAMDisk
- USBDisk
Important
●
Do not turn off power to the controller until there is a response.
(Example)
When "LABEL1.BKD" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded to the controller
<Command>
<Response>
BKDSAVE
The scene group 0 data currently being used by the controller is saved to a file.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
File name of
scene group
data
Specifies the save destination and file name during saving with a definite path (ex.:
\USBDisk\abc.bkd).
Save destinations include directories under the following systems.Be sure to attach a "BKD"
extension to the file name.
- RAMDisk
- USBDisk
Acesst 1.0 6251194