Omron FZ3 Series, Руководство пользователя

Страница: 105 / 304

4
Saving/Loading
Data
FZ3 User's Manual Loading Settings Data to Controller 103
Loading Settings Data to Controller
Loads the settings data saved in an external device to the controller. The scene name and scene group
name that have been loaded are displayed in the measurement information display area.
Note
●
If "Load from file" is performed for scene group 0 data, the data being loaded will also be saved to the
controller flash memory at the same time.During loading, do not restart, turn off power or remove the USB
memory. Data will be corrupted and the system will not work properly at the next startup.
1.
Perform either of the following.
●
Plug the USB memory device which has the load data stored in it into the controller.
●
Send setting data to the controller's RAM Disk via FTP.
2.
On the Main screen, tap the [Data] menu - [Load from file].
The Load from File window is displayed.
3.
Select the file to load.
4.
Tap [OK].
The window showing the transfer status is displayed, and the data is transferred.
Acesst 1.0 6251194