Omron FQ2 Series, Руководство пользователя

Страница: 363 / 516

Controlling Operation and Outputting Data with TCP No-protocol Communications
FQ2 User’s Manual
361
C
onne
cti
ng th
rough
Ethern
et
9
Start Continuous Measurements
This command starts continuous measurements.
If data output is not set, only continuous measurement is performed.
If data output is set, continuous measurement is performed and the results corresponding to the number of
measurements made are returned as response data.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Measurement result The measurement results corresponding to the number of measurements made are out-
put when data output is set.
The measurement result is not output when data output is not set.
Setting the Data To Output Automatically after Measurements: p. 352
A S M E CR U R E / C
Delimiter
CR M / C
Delimiter
or
CR
CR
CR O K
CR
Delimiter
Data ret u rned for the n u m b er of
contin u o u s meas u rements made.
Meas u re-
ment res u lt
Meas u re-
ment res u lt
Meas u re-
ment res u lt
CR E R
Delimiter