Omron FQ2 Series, Руководство пользователя

Страница: 273 / 516

Controlling Operation and Outputting Data with a Parallel Interface Sensor Data Unit
FQ2 User’s Manual
271
8
Co
ntro
llin
g Operatio
n an
d Ou
tp
utti
ng Da
ta
with a Parall
el Con
nection
[Image]
−
[Camera setup]
−
[ ]
−
[Lighting control]
1
Change the setting for lighting control.
When the strobe polarity is set to [Negative], a delay of about 200 to 300
μ
s occurs from when the TRIG signal
is input until the STGOUT signal goes low. When a high-speed shutter is used, set the [Output polarity]
parameter to [Positive].
• Timing Chart for Strobe Trigger Output Signal
The STGOUT signal turns ON in sync with the trigger input signal from an external device.
Controlling Operation from an External Device
The following Sensor functions can be controlled with command inputs from an external device without
connecting the Touch Finder.
Item Parameter Setting Description
Lighting control Strobe output delay 0 to 65,535
μ
s
(default: 0
μ
s)
Enter the delay time from when the TRIG signal is
input until the external lighting is lit.
Strobe output time 0 to 65,535
μ
s
(default: 1,000
μ
s)
Set the pulse width of the output signal (STGOUT)
that tells the external lighting when to light.
Operation Description Reference
Switching the scene This command changes the scene when the line process changes. p. 272
Clearing measurement
values This command clears the measurement values.
The OR signal and D signals are not cleared. p. 273
Clearing an error This command turns the ERROR signal OFF.
The ERROR indicator is also turned OFF. p. 274
Re-registering the model
and reference color This command re-registers the model and reference color. p. 276
Teaching This command uses the image that is currently being input to execute
teaching for all of the registered items. p. 277
Clearing the OR and D sig-
nals This command clears the OR signal and D signals. p. 278
Saving data in the Sensor This command saves the current settings (scene data and system data)
in the Sensor. p. 280
Important
Trigger inp u t (TRIG)
Expos u re time
Imaging element
sh
u tter signal
STGOUT
Trigger delay
Stro b e o u tp u t delay
Stro b e o u tp u t time
O N
OFF
O N
OFF
O N
OFF
Polarity of all o u tp u t signals: Positi v e