Omron FQ2 Series, Руководство пользователя

Страница: 242 / 516

Controlling Operation and Outputting Data with the Sensor's Standard Parallel Connection
240
FQ2 User’s Manual
Setting the Outputs
Using the Overall Judgement Result
When the results of the inspection items are judged, if even one individual judgement result is NG, the OR
output signal is turned ON.
Wiring
Timing Chart
The OR signal that is output is held until the next overall judgement is output.
• The overall judgement result output signal can also be turned ON when all individual judgement results are OK.
Changing the judgement output ON condition: p. 244
• You can select whether to include the judgement result of one of the expressions (0 through 31) in the overall
judgement.
Using Calculation Results without Applying Them to the Overall Judgement: p. 161
• You can adjust the timing for outputting the OR signal and the ON time after judgement processing.
Adjust the Judgement Output Timing: p. 242
Color Signal Description The signals shown at the left are used.
Refer to the following information for signal wiring.
Black OUT0 (OR) Overall judgement (default
assignment)
2-4 Wiring: p. 42
OK
N G
OK Inspection
item 31
If there is e v en one N G j u dgement,
the o v erall j u dgement w ill b e N G
and the o u tp u t w ill b e t u rned O N .
N G (OR signal O N )
Inspection
item 1
O v erall j u dgement
Inspection
item 0
Indi v id u al j u dgement res u lts
OK Expression
Note
OFF
O N
OFF
O N
O v erall j u dgement
T u rned O N w hen o v erall
j u dgement is N G.
(OR o u tp u t: O N for N G)
OR signal
O N w hile meas u rements are
b eing processed (depends
on BUSY o u tp u t conditions)
BUSY signal
TRIG signal
O N for 1 ms min.