Omron FQ2-S4, Руководство пользователя, Страница: 516 / 594

External Reference Parameters
514
FQ2-S4 User’s Manual
*1 Use the ITEMDATA2 command to set and/or acquire a text string.
2D-code
500 Display
setting Number of characters
display Setting/Acqui-
sition 0: OFF
1: ON 1 --- ---
501 Character display Setting/Acqui-
sition 0: OFF
1: ON 1 --- ---
External
refer-
ence
number Category Data name Setting/Acqui-
sition Data range Default Expres-
sion text
string Logged data/
Judgement
parameter
0 Mea-
sure-
ment
result Judgement Acquisition
only
−
2: Not measured,
0: Judgement is OK,
1: Judgement is NG,
13: Teaching not performed
error,
14: Figure not registered
error,
15: Out of range error,
−
16: Measurement timeout
error
−
2 JG Logged data
5 Index No. Acquisition
only
−
2: Verification OFF,
or reading error
−
1: Verification is NG,
0 to 31: Master data No.
−
2 IN ---
6 Num. of characters Acquisition
only 0 to 1024 0 N Logged data
7
*1
Characters Acquisition
only 32 characters max. 0 --- ---
103 Output
parame-
ter Reflect Setting/Acqui-
sition 0: Yes, 1: No 0 --- ---
121 Verifica-
tion con-
dition Verified master data Settings/
Acquisition
−
1: OFF
0: Verify all master data
1: Verify master data 0
2: Verify master data 1
0 --- ---
122 Partial verif. on/off Settings/
Acquisition 0: None
1: Enable 0 --- ---
123 Last compared digit Settings/
Acquisition 1 to 1024 1024 --- ---
124 First compared digit Settings/
Acquisition 1 to 1024 1 --- ---
125 Output
parame-
ter String output on/off Settings/
Acquisition 0: None
1: Enable 0 --- ---
126 Error string size (bytes) Settings/
Acquisition
1 to 20 2 --- ---
127
*1
Error string Settings/
Acquisition 20 characters max. NG --- ---
128 Partial output on/off Settings/
Acquisition 0: None
1: Enable 0 --- ---
129 Output last digit Settings/
Acquisition 1 to 1024 1024 --- ---
130 Output first digit Settings/
Acquisition 1 to 1024 1 --- ---
External
refer-
ence
number Category Data name Setting/Acqui-
sition Data range Default Expres-
sion text
string Logged data/
Judgement
parameter
...