Omron FQ2-S/CH Series Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 590

Omron FQ2-S/CH Series Скачать руководство пользователя страница 48

Installation

46

FQ2-S/CH User’s Manual

Installing the Touch Finder

Installation Precautions

Install the Touch Finder in the following orientation to allow sufficient heat dissipation.

Do not mount it in the following orientations.

• To improve ventilation, leave space on both sides of the Touch Finder.

The distance between the Touch Finder and other devices should be at least that shown in the following diagram.

• Make sure that the ambient temperature is 50

°

C or lower. If it exceeds 50

°

C, install an cooling fan or an air condi-

tioner and maintain the temperature at 50

°

C or lower.

• To prevent interference by noise, do not mount the Sensor on panels which contain high-voltage devices.
• To keep the level of noise from the surrounding environment to a minimum, install the Sensor and Touch Finder at

least 10 m away from power lines.

Important

15 mm min.

15 mm min.

«
...
46
47
48
49
50
...
»

Содержание FQ2-S/CH Series















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов