Omron FQ2-S/CH Series Скачать руководство пользователя страница 386 | Manualshive

Страница: 386 / 590

Omron FQ2-S/CH Series Скачать руководство пользователя страница 386

Display Functions

384

FQ2-S/CH User’s Manual

Automatically Changing to the Display for Any Sensor with an NG Result

You can change the settings to automatically display the Sensor for which the measurement result is NG if
more than one Sensor is connected.

(Run Mode)

−

[Sensor monitor]

−

[NG Sensor]

Hiding the Menu

To view an image that is hidden behind the menu, or to set a shape to full screen display, you can display only
the image in the touch finder or on your computer.
If you press the icon again, the menu will be displayed.

(Setup Mode or Run Mode)

Turning ON/OFF the Touch Finder Backlight

You can use Eco Mode to turn OFF the LCD backlight and reduce the power consumed by the Touch Finder
whenever there is no operation on the Touch Finder for 30 seconds or longer. The LCD backlight will turn ON
whenever any part of the touch panel is pressed.

(Setup Mode or Run Mode)

−

[TF settings]

−

[LCD Backlight]

−

[ECO mode]

Changing the Brightness of the Touch Finder

The brightness of the LCD backlight can be changed to any of five levels.

(Setup Mode or Run Mode)

−

[TF settings]

−

[LCD Backlight]

−

[Brightness]

«
...
384
385
386
387
388
...
»

Содержание FQ2-S/CH Series















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов