Omron FQ2-S/CH Series, Руководство пользователя, Страница: 365 / 590

Editing the Model Region / Measurement Region from Run Mode FQ2-S/CH User’s Manual
363
6
Operatio
n
6-5 Editing the Model Region / Measurement Region from Run Mode
FQ2-S1 FQ2-S2 FQ2-S3 FQ2-S4 FQ2-CH
With this Sensor, you can move from Run Mode to the model edit / measurement region edit display. This
eliminates the need to move to Setup Mode, making it easier to edit the model region / measurement region.
The procedure for editing the model region are explained below. The measurement region can be edited in the
same way.
Preparations
In the Default state, this function is turned OFF to prevent accidental operation in Run Mode.
To use the function, first turn it ON.
(Setup Mode) − [Sensor settings] − [Adjustment mode in Run]
1
Press [ON].
Editing the Model Region from Run Mode
The procedure for editing the model region from Run Mode is explained below.
1
Use the and Buttons to select the inspection item whose model region you want to
adjust.
2
Press [ ] – [Model region].
3
Change the model region.
4
Press [OK].
The BUSY signal is ON during model region editing. Take care that this does not affect the line.
Important