Omron FQ2-S/CH Series Скачать руководство пользователя страница 317 | Manualshive

Страница: 317 / 590

Omron FQ2-S/CH Series Скачать руководство пользователя страница 317

Inspecting with the Labeling Inspection Item

FQ2-S/CH User’s Manual

315

4

Setting Up Inspect

ions

Measuring More Than One Color

Set the colors using the color palette.
Press [

] – [Color palette] on the Set Color Display to display the color palette. Up to four colors can be specified.

If the

Color inv.

Option is selected, the color outside the region will become the selected color.

The [Inv.] Check Box applies to all colors. Select the [Exclusion] Check Box to exclude the selected color from
extraction.
The order of exclusion is from the largest color palette number.

Making the Extract Color Easier to Check

• The display for the extracted color can be switched by using [

]

−

[Display setting].

(The following display patterns can be selected for the extracted color: [Measurement image], [All color image]
(Default), [Selected color image], or [Binary image].)

• Press [

] – [Background color] to change the display for colors other than the extraction color.

(The color can be chosen from [Black] (Default), [White], [Red], [Green], or [Blue].)

Note

«
...
315
316
317
318
319
...
»

Содержание FQ2-S/CH Series















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов