manualshive.com logo in svg

Omron FQ2-S/CH Series, Руководство пользователя, Страница: 295 / 590

Поделиться
Скачать
Omron FQ2-S/CH Series Скачать руководство пользователя страница 295

Inspecting with Color Data Inspection Item

FQ2-S/CH User’s Manual

293

 4 

Setting Up Inspect

ions

4-15 Inspecting with Color Data Inspection Item

FQ2-S1

FQ2-S2

FQ2-S3

FQ2-S4

Color Data Inspection Item

This inspection item is used to perform inspections for foreign matter with a different color or for presence. The
region is set for a portion of the image with the color that is to be measured. This region is called the
measurement region. The average color within the measurement region is measured. 
If a Sensor with a Monochrome Camera is connected, the average density in the measurement region is found
and inspections are performed for the difference from the registered reference value (density average) and the
variation within the measurement region (density deviation).

If a Sensor with a Monochrome Camera is connected, the average density in the measurement region is
measured and the density deviation is used for judgments.

OK

NG

Measurement region

Judges using the average 
color of the measurement 
region.

Sample Settings

Sample Measurement

Содержание FQ2-S/CH Series















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов