Omron FQ2-S/CH Series, Руководство пользователя

Страница: 239 / 590

Inspecting with the Shape Search III Inspection Item FQ2-S/CH User’s Manual
237
4
Setting Up Inspect
ions
Select the Results to Output
You can use multiple conditions to determine which results to output from all the objects detected with a
correlation at the candidate level or higher.
Only the results that meet all the specified conditions are output.
[Inspect]
−
[Inspection]
−
[Shape Search III]
−
[Modify]
−
[Details] Tab Page
−
[Meas. Parameter]
1
Press [Extraction condition] and adjust the candi-
date level so that only objects higher than a certain
correlation are detected.
2
Set the conditions for outputting the detected
objects.
(Extraction X/Y and Detection Count)
Extraction condition Range Description
Candidate level 0 to 100
Default: 50 Set the threshold to find Candidate.
Output only a value that is higher than [Candidate level].
Increase the value if Model search is unstable.
Extraction X
−
99999.9999 to 99999.9999
Defaults: Lower:
−
99,999.9999
Upper: 99,999.9999
Results are output only for objects with a measured X
coordinate that is within this range.
Extraction Y
− 99999.9999 to 99999.9999
Defaults: Lower:
−
99,999.9999
Upper: 99,999.9999
Results are output only for objects with a measured Y
coordinate that is within this range.
Detection count 1 to 32
Default: 1 Sets the maximum number of detection results to output.
The processing time changes if you change the candidate level.
Note