Omron FQ2-S/CH Series, Руководство пользователя, Страница: 148 / 590

Reading with OCR
146
FQ2-S/CH User’s Manual
Step 3 Setting the Judgment Parameters
Settings are made to check whether the characters that were read from the workpiece were recognized
correctly. Differences between the references that were taught for character recognition and the actual result of
reading the characters are detected and conditions are set to determine how accurately characters are read.
[Inspect]
−
[Inspection]
−
[OCR]
−
[Settings] Tab Page
3
Press [OK] to enter the values.
1
Press [Judgement].
2
Press each parameter and set the range that is
to be judged as OK.
Set the range for each of the following parameters.
Continuous measurements will be performed for
the images that are displayed.
• You can change measurement values that appear on the display on the Display Settings Display.
Press − [Display setting] on the right of the display to switch to the Display Settings Display.
• You can automatically adjust the judgment conditions by using OK and NG workpieces.
Test Measurements: p. 346
Press − [Auto adjustment] on the right of the display to switch to the Auto adjustment Display.
• You can set the judgment condition depending on figure numeral, alphabet, or character type.
Touch − [Judgement mode], displays the Judgment mode window.
Whole setting: Set the same judgment condition to all of the character strings.
Individual setting: Set judgment condition to each character strings.
Note