![background image](http://html1.mh-extra.com/html/omron/fh-sm02/fh-sm02_construction-manual_742865097.webp)
93
6.4.3.
Setting Applications
Follow the procedures below to set a scene for applications.
1
Click [Scene switch] on the
Main Window of the Vision
Sensor.
Select target scenes. The target
scenes are as follows.
Pick: 0. Pick_On
-
hand_xx
Place: 2. Place_On
-
hand_xx
Click [OK] to switch scenes.
2
Check that the check box for
“Output” is not checked.
The serial data for the
measurement value is not
output until the Vision Sensor
setting is completed.
Place a check in the check box
when executing a robot sample
program described in Chapter
7.
3
Click [Robot Operation] on the
Main Window of the Vision
Sensor to open the “Robot
Operation” dialog.