Omron FH-2 Series, Руководство по установке оборудования, Страница: 56 / 244

2-3 Flow of Use Procedure
The following table shows the flow for using the FH.
Procedure Description Reference
Preparations Installation and Wiring Section 4 Handling and Installation Envi-
ronment
on page 4-1
Section 5 Setup and Wiring on page
5-1
↓
Turning ON Power
5-1 When turning ON and OFF on page
5-2
↓
Language Selection in Dialog Box (only
when the Sensor Controller is started for
the first time)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Main Window (Layout 0) Display
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Camera Adjustments (Display the settings
dialog box for a Camera Image Input proc-
essing item.)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Select
Tool - System settings , and then
under Startup setting , set the settings for
Basic , Communication , and Operation
mode .
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Click the
Data save button, and then select
Function - System restart .
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Select
Tool - System settings , and then
set the settings for Camera ,
Communication and Other .
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Click the
Data save button. Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Scene Editing
In the Main Window (layout 0), edit the
measurement flow.
•
Register processing items.
•
Set the properties for each processing
item.
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓
Click the
Data save button. Vision System FH/FHV series User's
Manual (Cat.No. Z365)
↓↑
2 Overview of FH series
2-8
FH Series Vision System Hardware Setup Manual (Z366-E1)