Omron F3SG-PG Series, Руководство пользователя, Страница: 240 / 473

210
Chapter
4
O
ver
vi
ew
a
nd
Spec
if
ic
at
io
ns
F3SG-SR/PG
User’s Manual
Setting with SD Manager 3
4-1-4. SETTING State of F3SG-SR/PG with SD Manager 3
Connected
The F3SG-SR/PG connected with the Intelligent Tap can be transitioned to the SETTING state by the
SD Manager 3.
In the SETTING state, two types of access levels called operator level and administrator level can be selected.
For operator and administrator levels, refer to 4-2-5-1. Logging In
In the SETTING state, the F3SG-SR/PG operates as follows.
• The safety outputs are in the OFF state.
• The LED indicator blinks in a cycle corresponding to the access level.
[Operation of LED indicator]
* Refer to [LED indicator blinking patterns] below for more information on the blinking patterns.
The LED indicator of the emitter does not operate in the case the Optical Synchronization is enabled as the emitter is not
connected to the Intelligent Tap.
Sensor Indicator
Access Level
Operator Level Administrator Level
Emitters of
F3SG-SR and
F3SG-PGA-A/-L
Code A Blinking once * Blinking twice *
Code B Off Off
Off Off
Blinking once Blinking twice
Blinking once Blinking twice
TOP Off Off
BTM Off Off
Receivers of
F3SG-SR and
F3SG-PGA-A/-L
or Emitter/
Receiver of
F3SG-PGA-C
Code A Blinking once * Blinking twice *
Code B Off Off
Off Off
Off Off
Off Off
Blinking once * Blinking twice *
Blinking once * Blinking twice *
Off Off
TOP Off Off
BTM Off Off
or
C CODE
or ERR E
or L LO N G
or
T TEST
or C CODE
or ERR E
or O OSSD
or
M MAI N T
or P P N P
or F CFG
SEQ S or