Omron F3SG-PG Series, Руководство пользователя, Страница: 188 / 473

158
Ch
apt
e
r
3
D
IP Sw
it
ch on I
n
te
llige
n
t Ta
p
F3SG-SR/PG
User’s Manual
Setting with Intelligent Tap
3-5. DIP Switch on Intelligent Tap
Make sure the Responsible Person tests the operation of the F3SG-SR/PG after setting with the
DIP Switch on the F39-SGIT-IL3 to verify that the F3SG-SR/PG operates as intended. Make sure
to stop the machine until the test is complete. Unintended settings may cause a person to go
undetected, resulting in serious injury.
The table below lists the positions and assigned functions of the DIP Switches on the Intelligent Tap.
For detailed steps to change the settings of F3SG-SR/PG using the DIP Switch, refer to 3-10-1. Setting F3SG-SR/PG with
DIP Switch .

: Indicates a switch position.
*1. Not supported by F3SG-PG.
*2. Not supported by F3SG-PGA-A/-C.
Position Function Setting Description
1 Lock/Unlock
Unlock
Lock (factory default setting)
2 DIP Switch Enable/Disable
DIP Switch Disabled (factory default setting)
DIP Switch Enabled
3 EDM
EDM Disabled (factory default setting)
EDM Enabled
4, 5 Interlock/Pre-Reset
Auto Reset (factory default setting)
Pre-Reset
Manual Reset (Start/Restart Interlock)
Auto Reset (same as Auto Reset (factory default
setting))
6, 7
Fixed Blanking/
Floating Blanking *1
Blanking Disabled (factory default setting)
Fixed Blanking Enabled
Floating Blanking Enabled
Blanking Disabled (same as Blanking Disabled
(factory default setting))
8 Operating Range Selection *2
Long (factory default setting)
Short
1 O N
1 O N
2 O N
2 O N
3 O N
3 O N
4 O N
5 O N
4 O N
5 O N
5 O N
4 O N
4 O N
5 O N
6 O N
7 O N
7 O N
6 O N
6 O N
7 O N
6 O N
7 O N
8 O N
8 O N