1
F3E
Multibeam sensor
Ultra-flat multi-beam sensor for elevators
F3E
• Ultra-flat 9 mm shape for easy design-in in
elevator constructions
• Highest ambient light immunity
(200,000 lux) for installations with direct
sunlight exposition
• Triple crossing resolution maintained
close to zero distance
• Robust aluminum housing
• Ray failure toleration
• Test input
• Built-in amplifier
(operation with 10-30 VDC)
• Fulfills requirements of EN81-70
STRACK
LIFT AUTOMATION
Designed & manufactured
by
Ordering Information
Features
High reliability and flexibility:
Test input:
Function of multi-beam sensor can be tested by transmitter cut off on test signal. A subsequent receiver cut off can be
monitored by control unit.
Ray failure toleration:
As soon as one channel is not switching for more than 60 seconds, the F3E identifies a defect and deac-
tivates this channel. The sensor then functions normally again showing the defect channel by a red error LED.
Easy parameterization:
By test input of transmitter a parameterization of L-ON/D-ON operation and shading of LED areas is pos-
sible. No complicated programming or remote control needed
Potential free output:
The F3E provides a wear-free electronic relay output for highest connection flexibility and life-time.
Pitch
Detection area
channels
Number of
optical axis
Connection
Output
Model number
120 mm
1800 mm
16
46
5 m pre-wired
potential-
free output
F3E-16-T1 5M
M8 Connector (4-pin)
F3E-16-T6
40 mm
1800 mm
46
136
5 m pre-wired
F3E-46-T1 5M
M8 Connector (4-pin)
F3E-46-T6
