2. Preparation
9
2.3
Setting the Buzzer
The buzzer is activated by default, but can be deactivated.
Note:
The buzzer is only available in forehead measurement mode.
1.
Press the [ON/MEM] button.
2.
Press and hold the [ON/MEM] button for 3 seconds.
The “
” icon flashes on the display.
3.
Release the [ON/MEM] button.
The “
” icon remains lit and the buzzer is deactivated.
Note:
• If the [ON/MEM] button is pressed down for more than 5 seconds after the “
” icon
starts flashing, “OFF” appears on the display and the display will flash off, and then turn back on with the room
temperature continually showing on the display. The buzzer will still be deactivated.
• To activate the buzzer again, start from step 1.
