Omron EQ100-E, Руководство пользователя

Страница: 45 / 256

2. Specifications
2-14
2.2. Ratings and Performance
Hardware Specifications 2.2.1.
Item Details
Supply Voltage 100 to 240 VAC 50/60 Hz
Allowable Power Supply Voltage Range
85 to 264 VAC 50/60 Hz
Power Consumption 15VA or less
LAN and
sub-LAN
Ports 2 ports
Interface 10BASE-T/100BASE-TX
Connector RJ-45
Transmission Rate 10 M/100 Mbps
Type
CSMA/CD
Cascaded Stages 10BASE-T: Up to 4 stages, 100BASE-TX: Up to 2 stages
(for a repeater hub in both)
Transmission
Distance
100 m
Other Functions Automatic crossover/straight identification
RS-485 Ports 4 ports
Communications
Protocol
CompoWay/F
Maximum
Connections
31 devices for 1 port (total for the device: 31 devices × 4 ports =
124 devices)
Terminal Resistor Built-in (120 Ω )
Communication Speed
9.6 k/19.2 k/38.4 kbps (factory shipment: 9.6 kbps)
Data Length 7/8 bits (factory shipment: 7 bits)
Stop Bits 1/2 bits (factory shipment: 2 bits)
Vertical Parity None/Even/Odd (factory shipment: Even)
General-
Purpose
Input
Inputs 1 input
Function Pulse input
Input Voltage 10.2 to 26.4 VDC
Input Impedance Approx. 2.2 k Ω
Input Current 12 VDC/5 mA (TYP), 24 VDC/10 mA (TYP)
ON Voltage 10.2 VDC or higher
OFF Voltage 5.0 VDC or less
Input Pulse Width 5 ms or longer
General-
Purpose
Output
Count 4 outputs
Function Monitoring alarm output
Maximum Load Voltage
30 VDC
Maximum Load Current
50 mA/output
ON Resistance 5 Ω or less
Insulation Resistance (*) Between power terminals and FG terminal: 20 M Ω or higher
(500 VDC)
Between power terminals and general-purpose input, general
purpose outputs #1 to 4, RS-485 communications ports #1 to 4,
LAN, sub-LAN, OPTION1, and OPTION2: 20 M Ω or higher
(500 VDC)
Between ground, FG terminal and OPTION1, OPTION2: 20
M Ω or higher (500 VDC)
Withstand Voltage (*) Between power terminals and FG terminal: 1500 VAC for 1
minute