manualshive.com logo in svg

Omron DST1 Series, Руководство по эксплуатации, Страница: 7 / 114

Поделиться
Скачать
Omron DST1 Series Скачать руководство пользователя страница 7

Notice

 

Notice 

 

OMRON products are manufactured for use according to proper procedures by a 
qualified operator and only for the purposes described in this manual. 
The following conventions are used to indicate and classify precautions in this manual. 
Always heed the information provided with them. Failure to heed precautions can result 
in injury to people or damage to property. 
 

 

WARNING 

Indicates an imminently hazardous situation which, if not avoided, is 
likely to result in serious injury or may result in death. Additionally, 
there may be severe property damage. 

 

 

WARNING 

Indicates a potentially hazardous situation which, if not avoided, will 
result in minor or moderate injury or may result in serious injury or 
death. Additionally, there may be severe property damage. 

 

 

CAUTION 

Indicates a potentially hazardous situation which, if not avoided, may 
result in minor or moderate injury or in property damage. 

 

 

Indicates required actions. 

 

 

Indicates prohibited actions. 

 

OMRON Product References 

 
All OMRON products are capitalized in this manual. The word “Unit” is also capitalized 
when it refers to an OMRON product, regardless of whether or not it appears in the 
proper name of the product. 
 
The abbreviation “PLC” means Programmable Controller. “PC” is used, however, in 
some Programming Device displays to mean Programmable Controller. 
 

Visual Aids 

 
The following headings appear in the left column of the manual to help you locate 
different types of information. 
 

IMPORTANT 

Indicates important information on what to do or not to do to prevent failure to
operation, malfunction, or undesirable effects on product performance.

 

 

Note 

Indicates information of particular interest for efficient and convenient operation 
of the product.

 

 

1,2,3… 

Indicates lists of one sort or another, such as procedures, checklists, etc. 

 

1 

Содержание DST1 Series



















































































































Отзывы:

Нет отзывов