Omron DeviceNet 3G8F7-DRM21-E, Руководство по эксплуатации

Страница: 70 / 149

53
Function Lists
Section 4-1
I/O Data Access Service API Functions
Use the following API functions to refresh, set, and read I/O data when using
the Master function.
Slave Function API
Functions Slave Scan List Operations API Functions
Use the following API functions for scan list operations when the Slave func-
tion is operating.
I/O Communications Service API Functions
Use the following API functions for operations such as starting remote I/O
communications (Slave function), stopping remote I/O communications (Slave
function), or establishing a connection.
I/O Data Access Service API Functions
Use the following API functions to refresh, set, and read I/O data.
SCAN_GetActualSlaveDevice Reads existing Slave information.
SCAN_ConnectSlaveDevice Starts I/O communications with a specified
Slave.
SCAN_DisconnectSlaveDevice Stops I/O communications with a specified
Slave.
SCAN_SetScanTimeValue Sets the communications cycle time.
SCAN_GetScanTimeValue Reads the communications cycle time.
SCAN_StoreScanTimeValue Writes the communications cycle time to non-
volatile memory.
SCAN_LoadScanTimeValue Loads the communications cycle time from
non-volatile memory.
API function Operation
SCAN_IoRefresh Executes I/O refreshing.
SCAN_GetInData Reads Slave input data.
SCAN_SetOutData Sets Slave output data.
SCAN_SendMasterCosToSlave Immediately sends output data to Slaves from
the Master performing COS communications.
API function Operation
API function Operation
SCAN_RegisterSelfSlaveDevice Registers the Slave scan list.
SCAN_RemoveSelfSlaveDevice Deletes the Slave scan list.
SCAN_GetSelfSlaveDevice Reads the Slave scan list information.
SCAN_StoreSlaveScanlist Saves the Slave scan list to non-volatile mem-
ory.
SCAN_LoadSlaveScanlist Loads the Slave scan list from non-volatile
memory.
API function Operation
SCAN_ConnectMasterDevice Starts I/O communications with a Master.
SCAN_DisconnectMasterDevice Stops I/O communications with a Master.
API function Operation
SCAN_SlaveIoRefresh Executes Slave I/O refreshing.
SCAN_GetSlaveOutData Reads Master output data.
SCAN_SetSlaveInData Sets Master input data.
SCAN_SendSlaveCosToMaster Immediately sends input data to the Master from
Slaves performing COS communications.