70
Sealed Tilt Switch
D7E
Sealed Tilt Switch
D7E
• Pure mechanical vibration detector
• Sealed enclosure
• Output capacity from 0.1 A at 5 VDC to 100 A at 30 VDC
• RoHS Compliant
Ordering Information
Characteristics
Operating Angle
Model
50 to 80 degrees
D7E-3
Operating angle
Tilt of 50 to 80 degrees
The value of tilt degree is specified when the switch is tilted gradually (approx. 1 degree/s) from the horizontal.
Returning angle
Tilt of more than 25 degrees.
The value of tilt degree is specified when the switch is tilted gradually (approx. 1 degree/s) from the horizontal.
Permissible mounting level
1 degree max. from the horizontal
Contact form
Single pole single throw (NC contact / slow action)
Mounting
Pitch: 30 mm 2 screws (M3)
Height: 5.3mm
Soldering
Soldering iron: temperature 350 ±10°, 3 sec. max
Ratings
5 VDC, 0.1 mA to 30 VDC, 100 mA (resistive load)
Insulation resistance
100 M
Ω
min. (250 VDC, between each terminal of the same polarity)
To measure off condition
Contact resistance
300 m Ohm max. (Initial value)
Vibration during
transportation
Condition: Vibration: 200 gal (1 cycle: 0.5 sec.)
Vibration direction: 2 axial directions
Time: Total 50 hours
Shock
Condition: Acceleration: 980 m/s
2
3 times
Shock direction: 3 axial directions
Operating temperature and
humidity
Temperature: -25° to +60° (with no icing and condensation)
Humidity: 45 to 95% RH
Storage temperature and
humidity
Temperature: -25° to +60° (with no icing and condensation)
Humidity: 45 to 95% RH protection
Protection
IP67
