Omron CVM1-CLK21, Руководство по эксплуатации

Страница: 85 / 309

69
What Are Data Links? Section 5-1
• Only part of send data can be received and an offset can be used to spec-
ify the beginning of the desired part.
Manual Setting Options The following options can be set when manually setting data links.
Offsets
Data of the only the specified number of words can be received starting from
the specified word position. The starting word is set as an offset from the
beginning of the send data. The following is an example.
Easy Setting
The send data areas of all nodes can be set to the same size (same as for
automatic setting described next).
Automatically Setting Data Links
Automatic setting can be used to create simple data links.
• Using a Programming Device (such as a Programming Console), set the
automatic data link mode in the DM parameter area of the startup node.
• Area 1 can be selected from bit areas (i.e., IR, CIO, and LR areas) and
area 2 can be selected from Data Memory.
• In areas 1 and 2 send areas for each node are of the same size.
• Send nodes are in the same ascending order as node numbers.
• It is not possible to receive only a part of send data.
• All nodes can be specified to either participate or not participate in the
data link.
• The data link areas are exactly the same and common to all nodes partic-
ipating in the data links.
# 1
# 1
#2
# 1 # 2
# 1
# 1
# 2
# 1
Area 1
Area 2
Specified position in relation to the leading word
Specified number of words
Specified position in relation to the leading word
Specified number of words
Example
Node#1 Node#2 Node#3
# 3
# 2
# 1
# 3
# 2
# 1
# 3
# 2
# 1
# 3
# 2
# 1
# 3
# 2
# 1
# 3
# 2
# 1
Area 1
(Bit areas)
Area 2
(Data Memory)