Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 548 / 717

503
Interface Specifics
Section 7-4
Timing Chart
Function • Override is the function to change the feed rate specified in the motion
program or parameter to the user-specified speed with % specification.
• There are three types of override, the task override, axis override, and
internal override. They are used differently in motion program execution
depending on the speed.
• The axis override can be applied to the speed specified by operand V in
the motion program or the speed set in the axis parameter.
1
0
1
0
1
0
1
0
1
0
1
0
T1 T1
The bit [Positioning Completed] must be
ON when starting ABS origin setting.
Axis Control Bit:
ABS Origin Setting
Axis Status Bit:
Machine Origin
Axis Status Bit:
Busy
Axis Status Bit:
No Origin
Axis Status Bit:
Axis Operating
Axis Status Bit:
Positioning Completed
Word Variable Bit Name I/O
x+0
-
x+31 IW0440
-
IW045F 11 Axis Override Enable (Axis 1)
-
Axis Override Enable (Axis 32) Output