Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 335 / 717

290
Command Overview
Section 6-2
6-2-2 Command Format
The following notation is used for the format.
Simple
arithmetic
operations ASSIGN = @ M Assigns values to variables. Result assigned.
ADD + @ x Performs addition. Result assigned.
SUBTRACT
−
@ x Performs subtraction. Result assigned.
MULTIPLY * @ x Performs multiplication Result assigned.
DIVIDE / @ x Performs division. Result assigned.
REMAINDER % @ x Finds the remainder of a division
operation. Result assigned.
EXPONENT ^ @ x Applies exponents. Result assigned.
Logic oper-
ations OR (LOGICAL OR) | @ x Calculates logical OR. Result assigned.
XOR (LOGICAL
EXCLUSIVE OR) ~ @ x Calculates logical exclusive OR. Result assigned.
AND (LOGICAL
AND) & @ x Calculates logical AND. Result assigned.
NOT (REVERSE) ! @ x Reverses bits. Result assigned.
Functions ABSOLUTE VALUE ABS @ x Finds the absolute value. Result assigned.
SINE SIN @ x Finds the sine. Result assigned.
COSINE COS @ x Finds the cosine. Result assigned.
TANGENT TAN @ x Finds the tangent. Result assigned.
ARC SINE ASIN @ x Finds the arc sine. Result assigned.
ARC COSINE ACOS @ x Finds the arc cosine. Result assigned.
ARC TANGENT ATAN @ x Finds the arc tangent. Result assigned.
SQUARE ROOT SQR @ x Finds the square root. Result assigned.
EXPONENT EXP @ x Finds the exponent. Result assigned.
NATURAL LOGA-
RITHM LOG @ x Finds the natural logarithm. Result assigned.
DECIMAL FRAC @ x Finds the decimal portion. Result assigned.
SIGN SGN @ x Returns 1 for 0 or greater, and -1
for negative values. Result assigned.
Bit opera-
tions SPECIFIED BIT ON SET @ x Turns ON specified bits. Bit operation com-
pleted.
SPECIFIED BIT OFF RESET @ x Turns OFF specified bits. Bit operation com-
pleted.
SHIFT RIGHT SFTR @ M Shifts to right for specified
amount. Shift completed.
SHIFT LEFT SFTL @ M Shifts to left for specified
amount. Shift completed.
Data opera-
tions BCD-TO-BIN BIN @ x Converts BCD data to BIN data. Result assigned.
BIN-TO-BCD BCD @ x Converts BIN data to BCD data. Result assigned.
BLOCK TRANSFER XFER @ M Transfers data block. All data transferred.
CLEAR CLEAR @ M Clears data block to zero. All data cleared.
Classifica-
tion
Command/func-
tion name
Code Applicable
task
Summary Completion condi-
tion (Proceed to
next block)
Motion
Symbol Meaning
<> Indicates the content, data
{ } Optional operand, omissible
---N--- The operand that can be specified up to the number shown.
_ Required en quad