Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 144 / 717

99
System Parameters
Section 4-2
Explanation
Sets the No. of machine rotations related to the gear ratio between motor and
machine.
Note (1) When pulse is selected for the unit, the setting of this parameter is ig-
nored.
(2) When the following formula is not satisfied, the alarm 3040h: Gear ratio
range error will occur.
1/2147483647
≤
(P5AA04
×
P5AA06)/(value in the parameter 9001h
×
P5AA05)
≤
2147483647
(3) For details of the concept of setting gear ratio, see 4-2-4 Concept of Pa-
rameters (Page 103).
Explanation
Note For details of coordinate systems corresponding to modes, see 9-3 Coordi-
nate System (Page 558).
No. Address in MC
Unit
Name Type Unit Immediate
updating
P5AA06 5D45h +
(AA * 14h) Gear ratio 2 (Machine rotation
speed) Data Rotation No
Data configuration Setting range
00000001 to 00989680 Hex
(1 to 10000000) Initial value
00000001 (1)
31 00
Gear ratio 2
No. Address in MC
Unit
Name Type Unit Immediate
updating
P5AA07 5D46h +
(AA * 14h) Axis feed mode Data --- No
Data configuration Initial value
00000000 (0)
31 07 04 00
0 0 0 0 0 0 0
Bit Function and explanation
00 to 03 Reserved
04 to 07 Sets the method of managing the coordinate system for position com-
mands.
0: Limited length (On the mechanical configuration, the axis has trav-
eling limits.)
1: Unlimited length (On the mechanical configuration, the axis does
not have traveling limits.)
08 to 31 Reserved
No. Address in MC
Unit
Name Type Unit Immediate
updating
P5AA08 5D47h +
(AA * 14h) External input signal select 1 Data --- Yes
Data configuration Initial value
00000000 (0)
31 24 16 08 00
W Y Z X