Omron CS1W-CT021, Руководство по эксплуатации

Страница: 82 / 201

;&'4&'-0)*'")<
Section 3-5
)*
3-5-1 Range Mode
If the Unit is configured to control the Outputs in Range Mode, this Mode can be
applied to Circular Counters or Linear Counters (refer to 3-2-2
"Circular Counter"
and 3-2-3 "Linear Counter" for more information).
Example Range Mode with
Linear Counter
In this example four Ranges are specified. The configuration data of the Counter
shows that:
•
Output 0 must be ON for Counter Values within Range 0.
•
Both the Outputs 1 and 3 must be ON for Counter Values within Range 1.
•
Output 2 must be ON for Counter Values within Range 2.
•
Both the Outputs 0 and 3 must be ON for Counter Values within Range 3.
In the above example the Counter Value is within Range 1 and 3 and consequently
the Outputs 0, 1 and 3 are turned ON.
Counter Value
0
Range 0 Range 1
Range 2
Range 3
Output 0
Output 1
Output 2
Output 3
Range Lower Range Limit Upper Range Limit Output ON
0
1
2
3 -20,000
-1,000
-5,000
6,000
-10,000
+19,000
11,000
+25,000
0
1, 3
2
0, 3
Minimum Count Limit
-2,147,483,648
(=80000000
H
)
Maximum Count Limit
+2,147,483,647
(=7FFFFFFF
H
)
Current
Counter Value
W902-E2-03.book Seite 67 Donnerstag, 7. Oktober 2004 2:06 14