Omron CP1L-EL20DR-D, Руководство по эксплуатации

Страница: 112 / 856

78
Mounting Section 3-3
Mounting Height
The mounting height is approximately 90 mm.
When a cable is connected to an Option Board, however, the additional height
must be factored in. Always allow for the additional height when considering
the depth of the control panel in which the PLC is to be mounted.
3-3-2 Connecting Expansion Units and Expansion I/O Units
Leave approximately 10 mm of space between the CPU Unit and the Expan-
sion Units or Expansion I/O Units.
Mounting Method
10 mm
CP1L-EL/EM CPU Unit
Expansion I/O Units or Expansion Units
MAC Address:
01234567890A
00 NC 02 04 06 08 10 00 02 04 06 08 10
01 COM 03 05 07 09 11 01 03 05 07 09 11
BKUP
ERR/ALM
LNK/ACT
SYSMAC
CP1L
POWER
RUN
INH
1
00 01 02 03 04 06 00 01 03 04 06
COM 02 COM 05 07 COM COM(V+) 05 07
ANALOG INPUT
V1+ V2+ COM
2
Unit A (mm)
CP1L-EL/EM CPU Unit 40 I/O points 140
±
0.5
30 I/O points 120
±
0.5
20 I/O points 120
±
0.5
Expansion I/O Unit 40 I/O points 140
±
0.2
32 outputs 140
±
0.2
20 I/O points 76
±
0.2
16 outputs 76
±
0.2
8 inputs 56
±
0.2
8 outputs 56
±
0.2
Analog I/O Unit 76
±
0.2
Temperature Sensor Unit TS004 140
±
0.2
TS

01
TS

02
TS003
76
±
0.2
CompoBus/S I/O Link Unit 56
±
0.2
100 mm
A
A
CP1L-EL/EM CPU Unit
with 20, 30 or 40 I/O points
Expansion I/O Unit
with 32 or 40 I/O points
8 mm
100 mm
Expansion I/O Unit
with 8, 16 or 20 I/O points
Expansion Unit
8 mm