TM
Cleaning the Device Before First Use
1
Remove the inhalation top and vaporizer head from the
medication tank.
Remove any accessories (mouthpiece, mask or child accessory) from the
nebulizer kit if already attached.
2
Remove the vaporizer head from the inhalation top.
5636423-9A
Compressor Nebulizer
RE-C800KD
Cleaning Instructions
WARNING
• Failure to properly clean the COMP A-I-R components may cause bacterial growth, serious illness from contamination, compromised medication
delivery.
• Clean the parts of this device before using this device for the first time and also when the device has not been used for an extended period of time.
• Clean the parts of this device after each use.
• After cleaning, allow the parts to dry before reassembling. To avoid contamination, store the device and parts in a clean and safe location.
• DO NOT leave the cleaning solution on the parts. Rinse the parts with clean tap water after cleaning.
CAUTION
• Dry the parts by air drying only. DO NOT use any equipment to dry the device parts.
• To prevent damage to the device, DO NOT immerse the main unit in any liquid, DO NOT wash or rinse any of the parts under strong running water.
• To prevent damage to the device, DO NOT clean the main unit using abrasive cleaners or any type of chemical.
• NEVER clean with benzene or thinner.
CLEAN PARTS
BEFORE FIRST USE
