Omron CJ1W-SCU22, Руководство по эксплуатации, Страница: 92 / 478

2 Initial Settings and Allocations of Device Variable for CJ-series Unit
2-18
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
z
Protocol Macro Mode
Device variable for CJ-series Unit
Type R/W Name Function
Port 1 Port 2
*_P1_SendDelayCfg *_P2_SendDelayCfg WORD RW Send Delay
Settings Bit 15: Send delay time
Bits 00 to 14: Send delay
time (user-specified)
*_P1_SendDelaySetCfg *_P2_SendDelaySetCfg BOOL RW Send Delay
Time FALSE: Default (0 ms)
TRUE: User settings
There is no specific
device variable for
CJ-series Unit to set
the send delay setting
range.
When you reference
this setting, set to bits
00 to 14 of
*_P1_SendDelayCfg.
There is no specific
device variable for
CJ-series Unit to set
the send delay setting
range.
When you reference
this setting, set to bits
00 to 14 of
*_P2_SendDelayCfg.
Bit
string RW Send Delay
Time (user-
specified) 0 to 300 s (0 to 300,000
ms)
(0000 to 7530 hex; 0 to
30,000 decimal) [Unit: 10
ms]
*_P1_HlkCTSCtlCfg *_P2_HlkCTSCtlCfg BOOL RW CTS Control
(*1) FALSE: No
TRUE: Yes
Default: FALSE
*_P1_PmrSgwTimeoutCfg *_P2_PmrSgwTimeoutCfg WORD RW Serial Gateway
Timeout Moni-
toring Time
Setting 08 to 15: Serial Gateway
response timeout monitor-
ing time
00 to 07: Serial Gateway
send start timeout moni-
toring time
*_P1_PmrSgwResp
TimeoutCfg *_P2_PmrSgwResp
TimeoutCfg USINT RW Serial Gateway
Response Tim-
eout Monitor-
ing Time 0: 5 s (default)
Range: 1 to 255
0.1 to 25.5 s [Unit: 100
ms]
*_P1_PmrSgwSend
TimeoutCfg *_P2_PmrSgwSend
TimeoutCfg USINT RW Serial Gateway
Send Start Tim-
eout Monitor-
ing Time 0: 5 s (default)
Range: 1 to 255
0.1 to 25.5 s [Unit: 100
ms]
*_P1_PmrTransCfg *_P2_PmrTransCfg WORD RW Protocol macro
Transmission
Settings Bit 15: Protocol macro
transmission method
Bit 03: Clearing/holding
the contents of the recep-
tion buffer in full-duplex
mode
Bit 02: Link word specifi-
cation data exchange
method
*_P1_PmrTransTypCfg *_P2_PmrTransTypCfg BOOL RW Protocol macro
Transmission
method FALSE: Half-duplex
(default)
TRUE: Full-duplex