Omron CJ1W-SCU22, Руководство по эксплуатации, Страница: 340 / 478

A Standard System Protocol
R-6
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
The following 5 standard system protocols are provided with the CX-Protocol, Serial Communications
Boards, and Serial Communications Unit.
R-1-2 Standard System Protocols
Protocol name Function
CompoWay/F Master Protocol for sending CompoWay/F commands as a Master to OMRON CompoWay/F
slave components and receiving responses.
Mitsubishi Computer Link Master Protocol for sending Computer Link commands to Mitsubishi PLCs (Sequencer
CPU) used as slaves and receiving responses.
V500/V520 Bar Code Reader Protocol for controlling a Bar Code Reader via the Communications Board. Proce-
dures for controlling the Bar Code Reader in remote mode, reading the data that has
been read by the Bar Code Reader, and reading/writing operating parameters.
3Z4L Laser Micrometer Protocol for controlling a Laser Micrometer via the Communications Board. Proce-
dures for controlling the Laser Micrometer in remote mode, reading measured data,
and writing/reading operating parameters.
Hayes modem AT commands Protocol for controlling a Hayes modem (AT commands) via the Communications
Board. Procedures for initialization of the modem, dialing, data transmission, switch-
ing to escape mode, and disconnecting the line.