Omron CJ1W-SCU22, Руководство по эксплуатации, Страница: 234 / 478

6 No-protocol Mode
6-6
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
*_P1_ParityYNCfg *_P2_ParityYNCfg BOOL RW Parity (Yes/No) FALSE: Yes
TRUE: No
Default: FALSE
*_P1_ParityBitCfg *_P2_ParityBitCfg BOOL RW Parity
(Even/Odd) FALSE: Even
TRUE: Odd
Default: FALSE
*_P1_BaudrateCfg *_P2_BaudrateCfg USINT RW Baud Rate
(unit: bps) 0: 9600 3: 1200 4: 2400
5: 4800 6: 9600 7: 19200
8: 38400 9: 57600
10: 115200
11: 230400
Default: 0
*_P1_SendDelayCfg *_P2_SendDelayCfg WORD RW Send Delay
Setting Bit 15: Send delay time
Bits 00 to 14: Send delay
setting range
*_P1_SendDelaySetCf
g *_P2_SendDelaySetCf
g BOOL RW Send Delay
Time FALSE: Default (0 ms)
TRUE: User settings
There is no specific
device variable for CJ-
series Unit to reference
the send delay setting
range.
When you configure
this setting, set to bits
00 to 14 of
*_P1_SendDelayCfg.
There is no specific
device variable for CJ-
series Unit to reference
the send delay setting
range.
When you configure
this setting, set to bits
00 to 14 of
*_P2_SendDelayCfg.
Bit
string RW Send delay set-
ting range 0 to 300 s (0 to 300,000
ms)
(0000 to 7530 hex; 0 to
30,000 decimal) [Unit: 10
ms]
*_P1_HlkCTSCtlCfg *_P2_HlkCTSCtlCfg BOOL RW CTS Control
(*2) FALSE: No
TRUE: Yes
Default: FALSE
*_P1_NopStartCodeCfg *_P2_NopStartCodeCfg USINT RW No-protocol
Start Code Range: 0 to 255
*_P1_NopEndCodeCfg *_P2_NopEndCodeCfg USINT RW No-protocol
End Code Range: 0 to 255
*_P1_NopCfg *_P2_NopCfg WORD RW No-protocol
Settings Bit 12: No-protocol start
code inclusion setting
Bit 09: No-protocol CR +
LF specification setting
Bit 08: No-protocol end
code inclusion setting
Bits 00 to 07: Number of
received data bytes in No-
protocol Mode
*_P1_NopStartCodeY
NCfg *_P2_NopStartCodeY
NCfg BOOL RW No-protocol
Start Code
Inclusion Set-
ting TRUE: Yes
FALSE: No (default)
Device variable for CJ-series Unit
Type R/W Name Function
Port 1 Port 2