Omron CJ1W-SCU22, Руководство по эксплуатации, Страница: 197 / 478

5-5
5 Serial Gateway
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
5
-2 De
v
ice V
ariab
les f
o
r CJ-series Un
it an
d System-defined
V
ar
iab
les (D
uring
Serial Gat
e
wa
y Mod
e
)
5
5-2-1 D
e
vice
V
ar
iab
les f
or CJ-s
er
ies U
nit f
o
r System Settings
5-2 Device Variables for CJ-series Unit
and System-defined Variables
(During Serial Gateway Mode)
This section describes the device variables for CJ-series Unit and system-defined variables used in the
Serial Gateway Mode.
Use the device variables for CJ-series Unit shown below to perform System Settings when you use the
Serial Communications Unit in Serial Gateway Mode.
5-2-1 Device Variables for CJ-series Unit for System Settings
Device variable for CJ-series Unit
Type R/W Name Function
Port 1 Port 2
*_P1_PortCfg *_P2_PortCfg WORD RW Port Settings Bit 15: User-specified set-
ting inclusion (*1)
Bits 08 to 11: Serial com-
munications mode (9hex:
Serial Gateway Mode)
Bit 04: Start bits
Bit 03: Data length
Bit 02: Stop bits
Bit 01: Parity (Yes/No)
Bit 00: Parity (Even/Odd)
*_P1_SerSetCfg *_P2_SerSetCfg BOOL RW User-specified
Setting Inclu-
sion FALSE: Default
TRUE: User settings
Default: FALSE
There is no specific
device variable for CJ-
series Unit to reference
the serial communica-
tions mode.
When you set this set-
ting, set to bits 08 to 11
of *_P1_PortCfg.
There is no specific
device variable for CJ-
series Unit to reference
the serial communica-
tions mode.
When you set this set-
ting, set to bits 08 to 11
of *_P2_PortCfg.
Bit
string RW Serial Commu-
nications Mode Serial communications
mode
3 hex: No-protocol
6 hex: Protocol macro
9 hex: Serial Gateway
A hex: Modbus-RTU slave
F hex: Loopback test
Default: 0
*_P1_StartBitCfg *_P2_StartBitCfg BOOL RW Start Bits Always 1 bit regardless of
whether the setting is
FALSE/TRUE.
FALSE: 1 bit
TRUE: 1 bit
Default: FALSE
*_P1_DatBitCfg *_P2_DatBitCfg BOOL RW Data Length FALSE: 7 bits
TRUE: 8 bits
Default: FALSE
*_P1_StopBitCfg *_P2_StopBitCfg BOOL RW Stop Bits FALSE: 2 bits
TRUE: 1 bit
Default: FALSE