Omron CJ1W-CT021, Инструкции по эксплуатации, Страница: 90 / 196

3 Operation and Configuration
3-10
CJ-series High-speed Counter Units Operation Manual for NJ-series CPU Unit(W492)
z
Manual Control of Digital Output
If you select 1 for the following device variable Automan, then you can control two Digital Outputs by
setting them to either 0 (OFF) or 1 (ON).
* Automatic ON/OFF output can only be used with Circular Counters and Linear Counters in Range Mode or Com-
parison Mode (for details, refer to 3-5 Output Control).
z
Digital Outputs Status of Simple Counter
The status of the two Digital Outputs is reflected in the devices variables for CJ-series Unit (for
input).
Additional Information
A Circular Counter can uses all functions listed in 1-3-2 Functional Specifications.
z
Configuring Circular Counters
Circular Counters are set with the following device variables for CJ-series Unit (for setting).
Name of device variable
for CJ-series Unit
Type Name Function
*_AutoMan BOOL Automatic/Manual 0: Automatic ON/OFF output*
1: Manual output control
*_OutCtl0 BOOL Manual Output Con-
trol (Output 0) 0: OFF
1: ON
*_OutCtl1 BOOL Manual Output Con-
trol (Output 1) 0: OFF
1: ON
Name of device variable
for CJ-series Unit
Type Name Function
*_OutSta0 BOOL Digital Output 0 Status 0: OFF
1: ON
*_OutSta1 BOOL Digital Output 1 Status 0: OFF
1: ON
3-2-2 Circular Counter
Name of device variable
for CJ-series Unit
Type Name Function
*_Ch1_CtTypCfg UINT Counter Type 0: Circular Counter
1: Linear Counter
*_Ch2_CtTypCfg