10
6.1.2. Creating the I/O Table and Setting the IP Address
1
If the operating mode of the
PLC is
Run Mode
or
Monitor
Mode
, change to
Program
Mode
by following the steps
below.
(1) Select
Operating Mode
-
Program
from the PLC Menu
of the CX-Programmer.
(2) The dialog box on the right
is displayed. Confirm that there
is no problem and click the
Yes
Button.
(3) Confirm that Stop/Program
Mode is displayed on the right
of the PLC model in the
project workspace of the
CX-Programmer.