80709585_V_1_0.DOC
20/26
50 dB
Light traffic
60 dB
Normal conversation
70 dB
Vacuum cleaner
80 dB
Heavy traffic or telephone ringing
90 dB
Pneumatic drill
100 dB
Power mower
120 dB
Boom box in car
130 dB
Pain level
140 dB
Jet plane 30 meters overhead
It is important to know that doubling the power increases the noise level by 3 dB. The human hearing does
only recognize a doubling of the sound level when the noise level is increased by 10 dB. Damaging the
hearing does not depend on the sound level but on the noise level and starts way before the pain level.
Many people deceive themselves by thinking that noise is something they can get accustomed to. It is
possible that a positive opinion of a certain noise can reduce the physiological reaction, but the slow impacts
on the inner hearing must not be neglected: over stimulation and continuous elimination of the Cortic organ's
hair cells.
The reason why some people have got accustomed to a certain noise level and are no longer disturbed is
that they have already suffered a hearing damage. This damage make the insensitive to those frequencies
forming the loudest part of the noise. Getting accustomed to noise does not mean anything other than trying
to get along with the hearing loss in everyday life. The hearing loss itself cannot be healed, it can only be
compensated by hearing aids.
Subjectively, the hearing loss feels like dampened ears. This effect weakens with the time, but a loss in
hearing sensitivity often remains.
In order to relax the hearing sufficiently, the noise level should not exceed 70 dB(A) for 10 hours. Higher
noise levels during this relaxing period can prevent the relaxation and promote a permanent hearing damage
(Tinitus) or hearing loss.
Therefore:
Whoever wants to maintain his hearing should use hearing protectors!
DESCRIPTION
Features
12-channel (6 stereo-zone) power amplifier
• Ideal solution for powering any complex multi-zone, multi-speaker installation
• 6 stereo zones with 50 W/4 Ohm or 100 V per channel, (bridgeable to 100 W per zone)
• Bridge mode with 6 mono zones with 100 W/8 Ohm bridged or 200 V
• Outputs for connecting passive speaker-systems switchable from 100 V to low impedance per zone
• BUS input and output via RCA sockets
• Signal inputs via RCA sockets
• Speaker connection via terminal blocks
• Bridged-switch per amplifier pair for bridging
• Individual volume control, signal/clip LED and Limiter per zone
• Connection for external controller
