manualshive.com logo in svg

Omnitracs Trailer Tracks 150, Инструкция по установке и устранению неисправностей

Поделиться
Скачать
Omnitracs Trailer Tracks 150 Скачать руководство пользователя страница 50

80-J7616-1 Rev. C 

MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

 

50 

TT150 Device Diagnostics 

Once logged into the FST users can scan a TT150 device’s serial number or manually enter 
it into the FST to pull up diagnistics information about the device. The diagnostics 
information is divided into several sections: Device Assignment, Last Communication, GPS 
Status, Power and Battery, Version Info, and Actions. All of the sections except Device 
Assignment, Version Info, and Actions will be color coded either green or red. Green 
indicates a good status and red indicates there is a problem. 

Device Assignment shows the company the TT150 device belongs to, the Trailer SCAC, 
and the Trailer ID the TT150 device is assigned to. This section also contains the pencil icon 
button, which is used to edit the Trailer ID and SCAC. 

Last Communication shows the time stamp and location of the TT150 device’s last 
communication with the NOC and shows the RSSI. 

GPS Status shows how many satellites the TT150 device is in sight of, the antenna status, 
and the GPS fix statuses. The TT150 device needs to be in sight of a minimum of 4 
satellites to provide accurate positioning. 

Power and Battery shows if the TT150 is connected to external power, the voltage of the 
external power, and the TT150 device’s battery information and state, as well as the last 
time the TT150 device’s battery was fully charged. 

Version information shows the current script and firmware on the TT150 device. This 
information may be needed by Omnitracs support personnel for troubleshooting purposes. 

Actions allows a user to turn the TT150 device’s LED lights on or off, pull up a legend of 
what the LED light statuses indicate, ping a device to refresh the diagnostic information, 
uninstall a device from a trailer, or use the Misc button to set the Trailer Mileage or enter 
installation or maintenance notes. 

Set the Trailer ID and SCAC 

When the TT150 device is first connected to external power it communicates with the NOC 
and an entity for the device is created on the customer’s Trailer Tracks account. The TT150 
device’s Trailer ID is initially set to the TT150 device’s serial number and the SCAC is set to 
the company’s default SCAC. It is recommended that the Trailer ID be changed during 
installation to the name or ID of the trailer the TT150 device is being installed on.  

 

1.

 

Tap the pencil icon in Device Assignment. 

2.

 

Enter the Trailer ID in the box 

Содержание Trailer Tracks 150





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды