Omnitracs MCP100, Руководство по установке

Страница: 78 / 256

General Installation Guidelines Media Display Unit (MDU) Installation
9-2
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
80-J4866-2 Rev. G
General Installation Guidelines
1. Install the MDU holster and MDU.
2. Route and connect the cable to the MDU.
3. Connect the MDU cable to the MAS.
Selecting a Mounting Location
IMPORTANT SAFETY INFORMATION
Do not locate the display unit where it obstructs the driver’s field of vision, distracts the driver
from the driving task, or interferes with the driver’s operation of controls or displays.
DO NOT locate the MDU where it:
• obstructs the driver’s field of vision
• distracts the driver from the driving task
• interferes with the driver’s operation of controls or displays
• obstructs the area swept by the windshield wipers
• blocks the deployment of an airbag
DO locate the MDU where:
• it can be safely installed on a secured bracket that is robust enough to minimize any
vibration and sustain the weight of the MDU. Permanently affix the MDU to the:
- front dash area
- top of dash area
• the mounting surface is strong enough to support the mounting hardware
• the mounting surface is flat
• it is in the driver’s line-of-sight, easy to touch, but does not block the view of the road or
mirrors
• the surrounding area is clear of dash controls and gauges
• the display cable is long enough to reach the mating connector on the accessory cable
• it is not mounted in constant, direct sunlight
• it does not limit a passenger’s leg room or block access to any other compartments
• it does not interfere with anyone entering or exiting the vehicle cab
it is not likely to impact the driver or passenger in case of an accident or collision
.