OmniTek Ultra XR, Руководство пользователя

Страница: 90 / 184

3–6 XR-56-201 5 Generator 03/18
Generator
Creating a Line Pattern
New Line Patterns can be created by selecting the New Test
Pattern button at the bottom of the screen. Colour Bars
is created by default, but this can be changed by selecting
the pattern thumbnail from the desktop and modifying the
parameters in the control panel that appears at the right of
the screen.
Selecting a Line Pattern
Any line pattern on the desktop can be selected by clicking anywhere on the picture icon. Once
selected the picture icon will be outlined to indicated that it has been selected. The Pattern panel at
the right of the screen will change the line pattern type
Selecting the line pattern will cause it to be rendered into system RAM at the currently selected
output video format. The output format is determined by the link from the Generator block to the SDI
Outputs or HDMI Output block in the Connections menu.
Copying a Line Pattern
Any line pattern on the desktop can be copied by right-clicking using the mouse and selecting the
Clone Pattern
function. This will place a copy on the desktop which can then be renamed and edited
as required.
Exporting a Line Pattern
Any line pattern on the desktop can be exported from the system by right-clicking using the mouse and
selecting the
Export Pattern
function or by pressing the
Export
button at the bottom of the screen.
Deleting a Line Pattern
Any line pattern or sequence on the desktop can be deleted from the system by right-clicking using the
mouse and selecting the Delete function or by pressing the Delete button at the bottom of the screen.
Editing a Line Pattern
When the test pattern is selected the Line Pattern section of
the menu is displayed under the Pattern Tab.
The Pattern tab displays the properties for the Line Pattern.
Title allows the test pattern title to be renamed from the
default "Test Pattern".