OmniTek Ultra XR, Руководство пользователя

Страница: 65 / 184

Ultra XR User Guide 2–41 XR-56-201 5
Vie
w
er
Data
Cable View Tile
Cable View Description
The
Cable View
tile shows how the
data samples are assembled on a single
cable or multiple cable, multiple link and
multiple stream video connection.
Where video is delivered over multiple Inputs, these Inputs are generally delivered over more than
one cable with each cable delivering one or more Input. Where two or more Inputs are delivered on a
single cable, these are delivered interleaved.
The data samples are colour coded to match the SMPTE standard to identify data from the different
Inputs and show how this has been interleaved.
When the SMPTE Sample cursor is selected When the Active Picture cursor is selected
Cable View Controls
The following buttons are available when the Cable View tile is selected:
Go to SAV
this jumps to the start of active video
Go to EAV
this jumps to the end of active video
Format
this changes the format of the displayed data between hexadecimal and decimal
The current cursor position can be selected using the cursor panels. Using the Cable View and Data
View together allows specific data samples to be tracked from image to cable.
See the "Active Cursors & SMPTE Cursors Control Panels" section for different ways in which
to control the cursor.
Note that interpreting the data shown in these displays is not straightforward when it is associated
with video formats such as ‘Square Division’ or ‘2-Sample Interleave’ 4K UHD as these draw their data
from more than one input. Please refer to the appropriate SMPTE standards for details of data sample
structure.