OmniTek Ultra XR, Руководство пользователя

Страница: 3 / 184

Ultra XR User Guide iii XR-56-201 5
Con
ten
ts
Getting Started
Package Contents
The shipping box should contain the following
Ultra XR unit
Power Supply Unit
Mains lead
USB Manual
General Safety
Avoiding Personal Injury
To avoid injury and prevent damage to the Ultra or to any products connected to it, use this product
only as specified and take the following safety precautions. Where the Ultra is being used alongside
other equipment, you must also ensure that you act in accordance with the advice given in the
documentation supplied with those other products.
Only use the power cord that is both specified for this product and certified for the country of
use.
Ensure that the product is properly grounded through the grounding conductor within the
power cord.
Ensure that it is always possible for the user to switch off the power to the unit if need be.
Keep all product surfaces clean and dry.
Ensure that the unit is properly ventilated.
Do not operate in an explosive atmosphere or in damp/wet conditions.
Do not operate the Ultra with either the cover or any of the panels removed or otherwise
displaced from their standard positions.
Do not operate an Ultra that has been damaged (or that you suspect has been damaged).
When replacing the power supply fuse, only use a fuse of the specified type and rating.
Please note: The only user-serviceable parts are the fuse associated with the power supply and the
battery on the motherboard that backs up the system clock. There are no other user-serviceable parts.
In particular, the SD card on which the Ultra software is supplied is not a user-serviceable device:
swapping this card out will remove calibration data.
Power Supply
Make sure that the unit is connected to the correct power supply voltage. A power supply adaptor
is supplied with the unit which may be connected to any AC power supply between 100 and 240VAC
at 50-60Hz. Only use the supplied power adaptor with the unit. Do not use a damaged AC cable with
the unit as it may cause a shock or fire hazard. Replacement AC cables are available from your local
Omnitek agent.