manualshive.com logo in svg

OmniTek Ultra XR, Руководство пользователя

Поделиться
Скачать
OmniTek Ultra XR Скачать руководство пользователя страница 22

1–10

XR-56-201 5

Overview 03/18

Overview

Generator Menu

The 

Generator

 window, selected using the “Generator” tab at the top of the screen,or by selecting the 

<g> key on a locally connected keyboard. It is used to create, export and select line patterns for output 

via the SDI, HDMI or DisplayPort outputs.

The main part of the 

Generator

 window is a working desktop to place test patterns ready for selection. 

The panel on the right of the window allow the selected test pattern to be configured. The 

Patterns

 

tab in this panel is used to configure the test pattern image, the 

Audio

 tab is used to configure the 

audio associated with the test pattern and the 

Common

 tab displays the current system resources 

being used by the currently selected test pattern.

See the "Generator Window Menu Operation"  in the Generator chapter for full details

Содержание Ultra XR

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды